Brewing guide

Dial in your cup

Move the controls and watch the estimate respond. It is a starting point for your own taste, not a rule. It does not model overnight cold brew.

Estimated brewing guidance. Use it as a starting point and adjust your brew to taste. This tool does not model overnight cold brew.

Brew Variables

A research-grounded model of coffee extraction — now with micron-accurate grind, experimental processing methods, and immersion vs. percolation kinetics.

Cherries frozen or cold-macerated before or during fermentation. Ice-crystal formation ruptures cell walls, layering extra solubility on top of whichever process is selected above.
700 µm
Espresso ~250µm Pour-over ~650µm French Press ~1000µm Cold Brew ~1400µm
88°C
70°C 80°C 90°C 100°C
90–96°C is the standard specialty filter window. Below ~80°C you're into deliberately gentle, low-temp brewing rather than normal practice.
3:20
1:30 3:00 4:30 6:00
Kept to the 1:30–6:00 window used by modern quick-brew methods (pour-over, French press, quick bottle/immersion steeps) — not a 12–24hr extended cold steep.
1:13

Taste Profile Prediction

14% 16% 18% 20% 22% 26%

16–22% is the modern specialty pour-over range, where pleasant acidity plays a starring role: acid-forward and sweet-forward sit inside it, strong/intense caps it. Below 16% reads thin; beyond 22% turns bitter.

Sweet-Forward
20.0%
Estimated Extraction Yield
Likely range: 18.5% – 21.0%
Approx. brewed strength (TDS): 1.79%

Sweet, complex, balanced acidity, and jammy body.

How this works: the model separates two things research treats separately — a solubility ceiling set by roast, processing, grind diameter and brew ratio, and how much of that ceiling each brew method can actually reach. Percolation continuously replaces the water around the grounds with fresh, near-zero-concentration water, so the extraction driving force stays high and it can approach the full ceiling — which is also why it's the method most prone to over-extraction given too much time or too fine a grind. Full immersion is a single fixed batch of water: as it saturates, the driving force collapses toward a genuine equilibrium well short of the bean's full solubility, so it self-limits and rarely over-extracts even with extra time.

Sources & assumptions
Zanoni et al. (1992), J. Sci. Food Agric. — two-phase washing/diffusion extraction model.
Moroney et al. (2016), J. Math. Industry — coffee extraction kinetics & particle-diameter dependence.
Wang & Lim (2021), J. Food Process Eng. — temperature & grind-size kinetics, hot vs. cold brewing.
Voilley (1981); Spiro (1984) — diffusion/solubility fundamentals cited in extraction-modeling patents.
SCA Coffee Brewing Control Chart / Gold Cup Standard (1957 origin) — the classic 18–22% EY, 1.15–1.35% TDS reference band.
Coffee Chronicler (2023) and broader third-wave competition/roaster practice — modern specialty pour-overs increasingly target down to ~16% EY for deliberately acid-forward, bright profiles, which is why this tool treats 16–22% as the full "good" band rather than only 18–22%.
McCabe, Smith & Harriott, Unit Operations of Chemical Engineering; Perry's Chemical Engineers' Handbook — single-equilibrium-stage vs. continuous/countercurrent leaching recovery theory (the same framework used for industrial instant-coffee leaching), adapted here to derive full immersion's ceiling discount.
Scott Rao (2017), "Immersion vs. Percolation"; ITA Coffee — concentration-gradient/self-limiting behaviour of batch immersion versus continuously-refreshed percolation.
Honest Coffee Guide & Kruve micron databases — grind-size-to-micron reference ranges by brew method.
Royal New York; 1Zpresso; Nordic Brew Lab — anaerobic fermentation & carbonic maceration solubility behaviour.
Peer-reviewed yeast/LAB co-inoculation studies (ScienceDirect, 2020–2025) — pectinolytic breakdown & body/solubility effects used to estimate the co-fermentation modifier.
MTPak Coffee (cryomaceration); Frequent Coffee; Baristatus — frozen-cherry / cold-maceration processing notes. Freeze-thaw cell disruption itself is a general food-science principle (used for centuries in juicing/wine cold-soak), not yet a dedicated peer-reviewed coffee-extraction study — treat this modifier as the most speculative one in the model.
Known simplifications: immersion's ceiling discount assumes a single ideal equilibrium stage with roughly 1:1 partition between retained and bulk liquid — real cell walls bind some solutes more tightly than a simple dilution model predicts, and stirring/agitation (bloom, plunging, swirling) can push immersion closer to percolation's ceiling than modelled here. Coefficients throughout are calibrated to match well-documented brewing behaviour, not measured on a single reference instrument, since no public dataset covers every combination of roast, process, and brew method simulated here.

This is meant to act as a baseline or guide for pour-overs. Based on the taste, actual TDS, kindly adjust the recipe. Brew your own story!